Home »Aluminum-alloy-foil




Aluminum-B241-B234-B210-5083-foil

Aluminum Foils include cigarette foil¡¢household foil,Food soft packing Foil,cable foil etc. they are available with different surface treatment and finished machining,we can also fulfill Customized profile according to Pro-E, AutoCAD, Solidworks, ANSYS ASME VIII design.

Aluminum foil is produced by rolling aluminum slabs cast from molten aluminum in a rolling mill to the desired thickness. To maintain a constant thickness, a technician monitors the rolling mill sensors to ensure the pressure on the slab is correct.

Type

cigarette foil¡¢household foil,Food soft packing Foil,cable foil,tape foil

Aluminum Foil for A/C,Hydrophilic Aluminum Foil ,PS/CTP Base Board

Aluminum Foil Aluminum Foil of Narrow Width ,Cable Shielding Aluminum Foil Aluminum Foil Adhesive Tape,Hairdressing Aluminum,Aluminum Foil for Yogurt Lid..

Finishing

Mill finished, Anodized, Electrophoresis, Powder coated, Painted, Sliver matt, Sand blasted, PVDF, Silkscreened etc.

 

Standards:

EN 485-1 Technical conditions for inspection and delivery

EN 485-2 Mechanical Properties

EN 485-3 Tolerances for HOT Rolled Material

EN 485-4 Tolerances for COLD Rolled material

EN 515 Temper Designations

EN 573-1 Numerical alloy designation system

EN 573-2 Chemical symbol designation system

EN 573-3 Chemical Compositions

EN 573-4 Product forms in different alloys


Material list:

1) Grade: 1050,1060,1070,1100,1200,1235,3003,3102,8011, 8079 etc.
2) Temper: O,H14,H18,H22,H24,H26
3) Thickness: 0.005mm-0.2mm, per customer¡¯s request
4) Width:15mm-1850m

 

Material Grade:
1100 - This low-strength alloy has excellent corrosion-resistance, has satisfactory anodizing and conversion coating finishing characteristics,

3003 - Excellent workability rating. May show some slight discoloration when anodized, but reacts well to mechanical and organic finishings. Is easily welded and brazed, but soldering is limited to the torch method.

5005 - Excellent corrosion-resistance and weldability, but would rate somewhat below 1100 and 3003 for brazing and soldering, and it is not the alloy one would choose for machinability. Typical end uses are decorative trim, utensils, mobile home siding and reflectors.

5052 -Excellent corrosion-resistance, particularly in marine applications,Fair machining with proper set-up. Typical end uses include fuel tanks, truck-trailer side panels, small boat hulls, truck cabs, bumpers, storage tanks and pressure vessels.

5083 - With excellent corrosion-resistance and weldability, together with high strength, this alloy was designed for welded structures requiring maximum joint strength and efficiency.

5086 - Has excellent corrosion-resistance and weldability. Can be anodized for increased corrosion-resistance,Typical end uses are marine craft, containers, railroad cars, structurals and elevator cars.

6061 - Very good corrosion-resistance and finishability plus excellent weldability and a strength level approximating that of mild steel, this is a popular general-purpose alloy.

6063 - A heat-treatable alloy developed exclusively for the extrusion industry and the most important alloy in the magnesium silicide group.

also, we available provide 1060,3004,3102,5454,6005,6060,6063,6066,6560,7005,7072,7075 etc
ALUMINUM TEMPERS

"H" temper-non-heat-treatable alloys / strain-hardened

H14 - Strain hardened (cold worked) without thermal treatment and 1/2 hard.

H22 - Strain hardened and partially annealed, 1/4 hard.

H32 - Strain hardened and stabilized by low temperature heating, 1/4 hard.

H34 - Strain hardened and stabilized by low temperature heating, 1/2 hard.

H111 - Applies to products which are strain-hardened less than the amount required for a controlled H11 temper.

H112 - Applies to products which acquire some temper from shaping processes not having special control over the amount of strain-hardening or thermal treatment, but for which there are mechanical property limits

H116 - Applies to products manufactured from alloys in the 5xxx series, for which the magnesium content is 3% nominal or more.


"T" temper-heat-treatable-alloys / thermally treated

T6 - Solution heat-treated and artificially aged. A stable temper.
T52 - Stress-relieved by compressing. Applies to products which are stress-relieved by compressing after solution heat-treatment,
T651 - Solution heat treated, stress-relieved by stretching and artificalially aged. Equivalent to T6 and applies to plate and rolled bar except 2219
T6511 - Solution heat treated, stress-relieved by stretching and artificially aged with minor straightening. Equivalent to T6 and applies to extruded rod, bar and shapes except 2024

 

Length:

Random/Fixed length range 5.8m~15m, depending on out diemeter.

 

Surface treatment:

Nature,Black painting,Transparent oil, rust-proof black oil or hot-dip galvanized.

 

Packing:

Standard export, knitting bags, plastic end, in budle

 

Special design available according to customers requirement



Aluminum
 alloy Flanges

Yes! I am Interested



Home | Company Overview | Infrastructure | Our Products | Why C&N | News| Contact Us | Enquiry

Copyright 2009 C&N Pipeline Limted. All Rights Reserved
Add:Rm1023, No.15, Lane 201,Jin Xiang Road, Pudong ,Shanghai,201206